You are currently viewing Can-Am Parts Made in USA 2022 (Out-of-the-box picks)

Can-Am Parts Made in USA 2022 (Out-of-the-box picks)

If you are looking for some parts for your Can-am, American made options are the way to go. A Can-Am is a product line manufactured by BRP company, a company located in Canada. In the Can-Am vehicle category, it is divided into 2 types, Off-Road and On-Road. Can-am parts made in USA are accurate, extremely well put together, and built to last. Don’t choose a lousy part because it will either break quickly, or probably not be the right specifications for your cam-am. It would help if you chose parts based on your specific preferences and need.

There are a hundred different part manufactures in the USA, and choosing the best can be confusing.

Here is a list of the best Can-Am parts made in USA.

Read the reviews and get the best Can-Am parts that fits your preferences and unique requirements.

7 Can-Am Parts Made in USA 

Easy Viewing Can-AM Parts Made in USA Table

STV Motorsports Custom Rocker Switch Dash Panel for Can Am Maverick & Commander (no switches included) (4, Black)
Great Tool
Genuine EastPenn Deka ETX20L PowerSport Battery, Made in USA
Environmental Choice
K&N Engine Air Filter: High Performance, Premium, Powersport Air Filter: Fits 2014-2019 CAN-AM (Spyder F3 Limited, SE6, SM6, Special Series, F3-T SE6, RT Limited, 10th Anniversary, S Daytona) CM-1314
Fun Gear
SuperATV Light Tint Rear Windshield for Can-Am Maverick X3 (See Fitment) | USA Made | Made of 1/4” Polycarbonate- 250x Stronger Than Glass | Easy to Install
SuperATV Scratch Resistant Flip Windshield for Can-Am Maverick X3 (See Fitment) | 1/4" Thick Polycarbonate that is 250x Stronger than Glass | USA Made
STV Motorsports Custom Rocker Switch Dash Panel for Can Am Maverick & Commander (no switches included) (4, Black)
Genuine EastPenn Deka ETX20L PowerSport Battery, Made in USA
K&N Engine Air Filter: High Performance, Premium, Powersport Air Filter: Fits 2014-2019 CAN-AM (Spyder F3 Limited, SE6, SM6, Special Series, F3-T SE6, RT Limited, 10th Anniversary, S Daytona) CM-1314
SuperATV Light Tint Rear Windshield for Can-Am Maverick X3 (See Fitment) | USA Made | Made of 1/4” Polycarbonate- 250x Stronger Than Glass | Easy to Install
SuperATV Scratch Resistant Flip Windshield for Can-Am Maverick X3 (See Fitment) | 1/4" Thick Polycarbonate that is 250x Stronger than Glass | USA Made
-
-
-
-
-
STV Motorsports Custom Rocker Switch Dash Panel for Can Am Maverick & Commander (no switches included) (4, Black)
STV Motorsports Custom Rocker Switch Dash Panel for Can Am Maverick & Commander (no switches included) (4, Black)
-
Great Tool
Genuine EastPenn Deka ETX20L PowerSport Battery, Made in USA
Genuine EastPenn Deka ETX20L PowerSport Battery, Made in USA
-
Environmental Choice
K&N Engine Air Filter: High Performance, Premium, Powersport Air Filter: Fits 2014-2019 CAN-AM (Spyder F3 Limited, SE6, SM6, Special Series, F3-T SE6, RT Limited, 10th Anniversary, S Daytona) CM-1314
K&N Engine Air Filter: High Performance, Premium, Powersport Air Filter: Fits 2014-2019 CAN-AM (Spyder F3 Limited, SE6, SM6, Special Series, F3-T SE6, RT Limited, 10th Anniversary, S Daytona) CM-1314
-
Fun Gear
SuperATV Light Tint Rear Windshield for Can-Am Maverick X3 (See Fitment) | USA Made | Made of 1/4” Polycarbonate- 250x Stronger Than Glass | Easy to Install
SuperATV Light Tint Rear Windshield for Can-Am Maverick X3 (See Fitment) | USA Made | Made of 1/4” Polycarbonate- 250x Stronger Than Glass | Easy to Install
-
SuperATV Scratch Resistant Flip Windshield for Can-Am Maverick X3 (See Fitment) | 1/4" Thick Polycarbonate that is 250x Stronger than Glass | USA Made
SuperATV Scratch Resistant Flip Windshield for Can-Am Maverick X3 (See Fitment) | 1/4" Thick Polycarbonate that is 250x Stronger than Glass | USA Made
-

This isn’t what you’re looking for? You should check out our article on American Made Tee Shirts!

STV Motorsports Custom Rocker Switch Dash Panel for Can-Am Maverick & Commander Made in USA

STV Motorsports Custom Rocker Switch Dash Panel for Can Am Maverick & Commander (no switches included) (4, Black)
  • CUSTOM BUILT: The STV Motorsports custom made Can Am Commander and Maverick Dash Panel is a must-have upgrade for any driver of these vehicles. It is a great accessory that adds a custom look and functionality to your vehicle.
  • MANY VARIATIONS: You can choose from 4 or 5 switch dash panel as well as raw aluminum or black powder coated.
  • EASY INSTALLATION: Matches the opening in the Maverick dash board. All the mounting hardware and instructions are included.
  • APPLICATIONS: Fits all Can Am Commander and Maverick. Will not fir Maverick 2017 XMR models.
  • HIGH QUALITY: Constructed from aluminum and CNC machined, these dash panels are 100% made in the USA.

This STV Motorsports Custom Rocker Switch Dash Panel is the new version for those who are looking to upgrade this vehicle.

It is designed with 2 different types of control panel – so that you can choose the type of vehicle you are using.

You can also choose from 4 switches or 6 switches.

Uniquely, there is also the option to choose the color of these control panels. It comes in two types, raw aluminum, and black powder-coated aluminum.

It will not be too difficult for you to install it in your car.

After purchasing it, you can learn more about the super easy assembly with the included instruction sheet.

Everything is extremely detailed and easy to understand.

You can be assured of its quality. Because it is 100% processed and manufactured in the USA.

K&N Engine Air Filter CAN-AM Made in USA

K&N Engine Air Filter: High Performance, Premium, Powersport Air Filter: Fits 2014-2019 CAN-AM (Spyder F3 Limited, SE6, SM6, Special Series, F3-T SE6, RT Limited, 10th Anniversary, S Daytona) CM-1314
  • ULTIMATE LONGEVITY: 10-Year/Million Mile Limited Warranty protects for the life of your vehicle
  • ENGINEERED POWER: State-of-the-art filtration media provides up to 50% more airflow than disposable paper filters to increase power and acceleration Clogged or dirty air filters can reduce your vehicle’s acceleration by up to 10%
  • EASY INSTALLATION: Pre-oiled and ready to install One of the easiest and most cost-effective upgrades for your motorcycle or ATV for quick performance gains
  • SAVES MONEY: K&N high-flow replacement air filters will save you $250 over 10 years by avoiding disposable filters
  • ECO-FRIENDLY: Using a washable, reusable product helps reduce replacement waste A K&N filter will last longer than 10 disposable filters

K&N Engine Air Filter is an air filter with state-of-the-art technology that provides 50% more airflow than conventional filters.

This will help you in improving your acceleration by up to 10%.

As for its durability, there’s no need to worry, the device comes with a 10-year warranty against any manufacturing damage.

You also don’t need to spend too much effort installing it. As this part is pre-oiled and extremely easy to install. Designed to be installed on different Can-Am motorcycles.

Thanks to its durability and outstanding performance, you can save a lot of money on single-use filters.

This will help you have more money in your pocket when it’s time to upgrade the other parts on your Can-Am.

The materials are also quite environmentally friendly.

The K&N Engine Air Filter has actively contributed to limiting the discharge of disposable filters into the environment, minimizing the amount of waste!

You can easily disassemble and clean it whenever you want.

Overall, this is a quality piece that should be in every single Can-Am Vehicle.

Genuine EastPenn Deka ETX20L PowerSport Battery for Can-Am Made in USA

Genuine EastPenn Deka ETX20L PowerSport Battery, Made in USA
  • Genuine battery with original packages, meet OE Standard
  • No acid leaks to cause terminal corrosion
  • Withstands damaging effects of vibration
  • Environmentally friendly, spill-proof desig
  • Low discharge rates for off season storage

Genuine East Penn Deka ETX20L is a fuel cell commonly used in many vehicles.

Many people often use it for Can-Ams and appreciate the quality it brings.

We already know how good the quality is because it is also made in the USA, a place where quality always comes first.

There are many other batteries on the market that often have problems such as acid leakage during use.

This is extremely dangerous for those who are using batteries for their cars.

The Geniune EastPen Deka is extremely sturdy, minimizing the chance of acid leaks that corrode the Can-Ams parts.

You will not see any fuel spillage coming out from this guy.

Helping the environment while at the same time maximize your fuel source.

What could be better?

STVMotorsports Polaris RZR Turbo S RS1 Belt Changing Tool – for Can-Am made in The USA

STVMotorsports Polaris RZR Turbo S RS1 Belt Changing Tool - Made in The USA
  • CUSTOM DESIGNED: The STV Motorsports Belt Changing Tool is Designed, Machined and Produced in USA
  • FITS: Belt Changing Tool for Polaris RZR XP Turbo/S 2016-2019 and RS1 2018 & 2019
  • CNC MACHINED: Made from high quality materials, rust-proof and durable
  • EXTREMELY EASY TO USE: This tool will make changing your belt a super-fast and easy job; no modifications required and no extra tools necessary
  • GET BACK IN THE RACE!

The ATV Motorsports Polaris RZR Turbo S RS1 Belt Changing Tool is a great tool for Can-Am enthusiasts.

You will now enjoy how easy it is to remove the internal belts on your Can-Am.

Don’t worry about it’s durability, it is made from rust-resistant and highly durable materials.

Basically, it’s rough proof.

Using this tool is super easy, no need to worry about it.

All you need to do is insert one end of the tool into the center of the belt, turn it a few times, and you can remove the belt.

In case you are still not clear on how to use it, you can watch some video tutorials on Youtube, there are a lot of people doing this stuff.

This device has been manufactured to fit the Can-Am series in 2018 and 2019.

The manufacturers are preparing to launch a newer version to match the current models current vehicle line. Check your year before buying!!*

SuperATV Light Tint Rear Windshield for Can-Am Maverick X3 | USA Made

SuperATV Light Tint Rear Windshield for Can-Am Maverick X3 (See Fitment) | USA Made | Made of 1/4” Polycarbonate- 250x Stronger Than Glass | Easy to Install
  • 【Fits】Can-Am Maverick X3 900 / Turbo / X / Max (See Product Description for specific fitment) Note: Can be used with most soft or hard tops.
  • 【Fits】Can-Am Maverick X3 900 / Turbo / X / Max (See Product Description for specific fitment) Note: Can be used with most soft or hard tops.
  • Ride in Comfort】 A SuperATV Rear Windshield on your Can-Am Maverick X3 protects you and your passenger from your own rooster tail, it prevents dust from getting sucked into your cab when you use a front windshield alone, and it keeps you comfortable in any weather. With a tinted rear windshield, every day is ride day.
  • 【Strength & Durability】Our Can-Am Maverick X3 rear windshield is made with 1/4" polycarbonate. At 250 times stronger than glass and 25 times stronger than acrylic, it's virtually indestructible. We finish this Maverick back window off with our proprietary XR Optic Hard Coating on both sides for added durability. This coating makes it abrasion and scratch resistant, outperforming the competition. It’s UV resistant—you get the same clarity you had on day one because it won't fade or turn yellow.
  • 【Excellent Design】Our SuperATV windshield is designed specifically to fit the unique contour of your machine's cage and we use heavy-duty gaskets and bulb seals to keep moisture and air out, and beefy clamps for a totally secure installation. Altogether you get a snug, rattle-free fit that’s built for the off-road | Made in the USA

The SuperATV Light Tint Rear Windshield for Can-Am Maverick X3 is a rear windscreen designed to protect you and your passengers from outside objects and dirt.

Nothing ruins a ride quite like some rain.

It is also dirt resistant, making it easier for you to clean it after long trips.

As for its durability, it is built with 1/4 polycarbonate.

This will make it 150 times stronger than regular glass, and 25 times stronger than glass made of acrylic.

With this durability, it can go through many terrains while you never have to worry about replacing it.

We haven’t even brought up it’s patented UV resistance.

An easy choice when you’re looking for a little more comfort on your rides.

SuperATV Heavy Duty Scratch Resistant Full Windshield 2018 Can-Am Maverick X3 | USA Made!

SuperATV Heavy Duty Full Windshield for Can-Am Maverick X3 900 / X3 Turbo / X3 X / X3 MAX (See Fitment) | 1/4" Thick Clear Scratch Resistant Polycarbonate | 250x Stronger Than Glass | Made in the USA!
  • ✔️【 Fits】Can-Am Maverick X3 900 / X3 Turbo / X3 X (See product description for complete fitment) | Note: Can be used with most soft or hard tops,
  • 【Perfect Fit】 Our Maverick X3 Windshield is cut right here in Madison, Indiana and match the contours of your machine perfectly, You get the fit you need and thanks to the full length bulb seal, you keep the air, dust, and rain out of your cab.
  • 【Virtually Indestructible Material】 Our Maverick Full Windshield is made of 1/4 inch thick clear scratch resistant polycarbonate that is shatter resistant and designed for off-roading. It's 250 times stronger than glass and 25 times stronger than acrylic. | Made in the USA!
  • 【Hard Coated】 XR Optic Hard Coating is our carefully formulated coating that gives our Can-Am Maverick X3 Windshield scratch resistance you can’t get anywhere else. It’s coated inside and out so you can ride through brush and sand without ruining your Maverick Windshield.
  • 【Easy Install】All needed hardware included. Scan the enclosed QR code for instructions or visit SuperATV's website to view instructions and installation how-to video.

Possessing XR Optic Hard Coating, this windshield has incredible scratch resistance glass that is difficult to replace with any other material on the market.

Not only that, but this type of glass is also meticulously machined from the inside out, making it easy to withstand dust and some other objects, minimizing scratches.

Similar to the glass above, this glass is also made from Polycarbonate with a thickness of about 0.25 inches.

This makes it many times more durable than other, seemingly “indestructible” glass.

You don’t have to worry about their size, or whether they’ll fit your car.

Since this glass is made specifically for the Can-Am models, it will fit almost any Can-Am vehicle you are using.

Although its price is not cheap – compared to its quality and durability, this is the last time you will spend money on this.

SuperATV Scratch Resistant Flip Windshield for Can-Am Maverick X3 | USA Made

SuperATV Scratch Resistant Flip Windshield for Can-Am Maverick X3 (See Fitment) | 1/4" Thick Polycarbonate that is 250x Stronger than Glass | USA Made
  • ✔️【 Fits】 Can-Am Maverick X3 (See product description for complete fitment list) | ❌ NOTE: Will NOT work with OEM or aftermarket intrusion bars | Can be used with most soft or hard tops

SuperATV Scratch Resistant Flip Windshield for Can-Am Maverick X3 is a glass made for all-weather.

It is equipped with a 3-in-1 Flip design, you can comfortably perform operations such as closing, venting, or opening completely without having to leave your comfortable sitting position.

This is an extremely unique feature that not all products have.

Similar to the type of glass above, you will not have to worry about scratches on the car glass every time you go through dusty/dirty places.

Because it is equipped with the hard coating XR Optic, a material that makes the car glass scratch-resistant.

It is also geared with a couple other layers of protection to help you avoid exposure to UV rays.

This will protect your skin as well as ensure the coloring of the glass overtime.

It also has a set of LED lights to make your car more prominent and obvious at night. Nobody wants to get hurt in their Can-Am.

One caveat that you should know when installing this type of windshield in your vehicle is not to tighten it until everything is in place.

During the installation process, you will have many places that need to be adjusted accordingly.

Tightening the first time will make it difficult to adjust the others and potentially wear out the mounting positions.

Review some of the best Can-Am motorcycles in 2022.

We just think these are cool

Off-Road: 2022 Can-Am MAVERICK X3

A Can-Am Off-Road vehicle that is considered one of the best in 2022.

It is equipped with a system a 200 hp system and an advanced airflow system.

You can literally move through any terrain you want.

Along with that is the semi-active Smart-Shox system that will help you increase top speed basically in an instant.

This new version will give you a bigger, 32-inch wheel.

This upgrade will allow you the best experience on all terrains.

Its upgraded audio roof system has been a hit for many buyers.

It will feature colorful LEDs, an RMC amplifier, and a genuine Rockford Fosgate audio receiver.

You can enjoy a variety of your favorite music while you’re out there cruising around whatever mountain you’re on.

On-Road: 2022 Can-Am Spyder RT

If you want to enjoy a luxurious experience in a Can-Am vehicle, this vehicle is absolutely for you.

Not only does it look luxurious and classy, but ​​Can-Am Spyder RT also owns a lot of extreme systems.

With high-end LED headlights along with a modern control system with an LCD screen, you will feel like you’re in the future with this upgrade.

This system will help you in controlling the vehicle. I love having complete peace of mind while I’m getting used to a vehicle like this.

The car’s foam seats have also been upgraded to create some more comfort for the driver and rear passengers.

You will no longer feel uncomfortable on a long journey.

They’ve also added a very good windbreak system to improve riding/driving on long rides.

FAQ:

Is Can-Am an American-made product?

Most of Can-Am products are made in the USA!

Where is Can-Am made?

According to BRP, they currently have 2 Can-Am vehicles in production facilities in Juárez. In addition, they also have a number of other production facilities located in countries such as Canada, Finland, Austria, USA.

Which ATVs are made in the USA?

Two ATV brands whose products are mostly made in the US are Polaris and Arctic Cat.

Is Can-Am an American company?

Although Can-Am has some manufacturing facilities located in the US, it is nevertheless a Canadian company.

Stewart Kaplan
My Socials

Last update on 2022-05-13 / Affiliate links / Images from Amazon Product Advertising API

TedsWoodworking Plans and Projects
Genius Dog 336 x 280 - Animated